Boot trouble

[matob]

no ved hej, len popisuje podobne problémy ako ja, škoda že mu nik neodpísal
...
akurát som našiel niečo okolo MESA
neviem síce čo to je, ale... bolo by dobré ak by si mi vedel povedať čo vlastne
budem robiť predtým ako to spravím... diki

[Kiwi]

MESA sa ti objavi v Hardinfo vtedy, ked ti nejde proprietarny ATI driver pre OpenGL,
ale tebe ide, tak ta to nemusi zaujimat. Skus si cez Synaptic nainstalovat Stellarium.
Ak ti pojde bez problemov, tak ti OpenGL funguje korektne.

[matob]

Stellarium už mám, a aj podľa toho viem že mám chybu v OpenGL..:

[matob]

Práve sa snažím zosieťovať win-lin...
tu je super návod pre Sambu
...ale vedel som že niečo sa predsa musí pokaziť..: teda ukáže mi normálne oba pc v skupine..
lenže starý známy problém..: zdieľaný priečinok už neotvorím...
-nejde ani ping..

[Kiwi]

A mas Sambu, cize baliky samba, samba-common a smbclient nainstalovane ?
Tiez to mozes robit cez openssh-client a openssh-server, ale ty mas asi 2. WIN.

[matob]

OK už to ide
problém bol asi v tom, že som mal ako zdieľaný priečinok /home/mato..co nemôže byť
musí to byť hociaky iny pričinok.. paráda
už mi ostáva vyriešiť iba tú grafiku...

[Kiwi]

Tak skus nainstalovat tu MESU, mozno to ona naemuluje, ak nie tak kup podporovanu
grafiku a mas pokoj. Intel zverejnil zdrojaky, ale ATI a nVidia nie, tak s ich grafikymi budu
problemy, dokedy tie drivery nebudu napisane korektne.

[Palo M.]

Tusim iba vy dvaja tu robite nejaku diskusiu (dakujem). Co vsetci pozeraju hokej? To snad nie...

Co sa tyka samby, mne sa to nezda elementarne na nastavenie (myslim samba server). Pamatam sa, ze ked som to nahadzoval doma ja, predtym som studoval tony materialov nejaky cas, kym som pochopil ako to funguje a az potom som sa do toho pustil (ale oplatilo sa, lebo potom som to rozchodil pomerne rychlo). Inak "socket options" mi robia problemy (a podla netu nie som sam), na default mi to bezi lepsie.

Co sa tyka toho nestastneho videa, mam taky pocit ze to je len driverom. OpenGL je na 3D (cize napriklad simulator vesmiru), ale ked to rozhasi aj obycajne video (DivX), tak to nie je len 3D zalezitost... Mozno, ze driver nezafungoval dobre a teda sa spustil nejaky zakladny ("generic") VGA mod - bez 3D, bez akceleracie. Takze text a okienka zobrazuje, ale akonahle sa prepne na fullscreen alebo spusti nieco 3D, tak to ten zakladny VGA mod skratka nestiha.

Ja by som skusil nasledujuce:
1. Odlozil by som si kopiu /etc/X11/xorg.conf (aby som sa mal k comu vratit) a namiesto fglrx drivera skusil vesa. Pod tym sice nejde akcelerovane 3D, ale video by malo ist perfektne. Skusil by som, ci klasicke video ide normalne aj fullscreen. Ak VESA ide, znamena to ze chyba je vo fglrx driveri (bud v driveri samotnom alebo v jeho nastaveni).
2. S nastavenym fglrx driverom spustit graficke rozhranie a pozriet do logfilu (tusim /var/log/Xorg.log alebo nieco podobne). Tam by som hladal nejake error pripadne warning hlasky... a potom uz len Google, lebo tento problem uz urcite niekto mal

Inak toto si matob cital? A toto?

[matob]

Je to tak, že 3D akcelerácia je v pohode, len:

"Note that when Visual Effects (Compiz) are active, flickering and artifacts may occur in OpenGL applications and hardware accelerated video windows (particularly with R300 chipset). To prevent this, disable Visual Effects."
...
video tiež ide v pohode, kým nieje vo full-screen
no jediný človek, ktorý mal niečo podobné, ktorého som vygooglil, ostal bez reakcie na príspevok...takze

inak po editovaní xorg.conf je nutné reštartovať aby sa uplatnili zmeny?
PS: natrafil som v Synapticu na nejaké powertweak ... nejaké tools a utility
máte nejaké skúsenosti s takýmito programíkmi pre linux, alebo to ani nemá zmysel?

[Kiwi]

Palo ti radi taketo nieco:

Section "Device"
Identifier "Failsafe Device"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Failsafe Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Len si uprav pre seba, xorg.conf premenuj na xorg.conf.1,
toto daj do xorg.conf, stalc Ctrl+Alt+F1, logni sa, stopni gdm
prikazom sudo /etc/init.d/gdm stop, a potom restartni /etc/init.d/gdm start,
mozes to aj skratit na /etc/init.d/gdm restart, ten xorg.conf je v /etc/X11.

[Palo M.]

inak po editovaní xorg.conf je nutné reštartovať aby sa uplatnili zmeny?

Musis minimalne restartnut X-server. Ale restart celej masiny je na menej kliknuti...

[Kiwi]

Lenze restart gdm trva sekundu a boot minimalne 25 sec.
Co sa tyka Samby, u mna je to v dvoch klikoch:

[matob]

skúsil som to, ale nič nové som sa nedozvedel..
ale spravil som jednu vec čo som našiel v jednom z tych linkov od Pala..:
Section "Device"
[...]
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
[...]
EndSection
-teda pridal som video a openGL overlay hodnoty.
Docielil som to, že video ide perfektne vo full screen-e, ale vôbec v okne..
stellarium "pokulhává" tj. 13fps, celestia-tiež openGL - problémy s blikaním pretrvávajú...

-Kiwi, v porovnaní s tvojim xorg.conf, tam mám o dosť menej options a vôbec všetkého...
nechýba mi tam niečo?

[Kiwi]

Do xorg.conf mozes dat aj 1000 parametrov, len musis vediet, na co ktory je.
To najdes na stranke k tvojej karte.

[matob]

Debug log z FLV playera, skús, či niečo nevyčítaš...diki

-- logger module started --
ffmpeg debug: libavcodec initialized (interface 3352064 )
ffmpeg debug: postprocessing disabled
ffmpeg debug: ffmpeg codec (h264) started
main debug: using decoder module "ffmpeg"
main debug: thread 2955762576 (decoder) created at priority 0 (input/decoder.c:159)
main debug: looking for decoder module: 25 candidates
main debug: using decoder module "faad"
main debug: thread 2947369872 (decoder) created at priority 0 (input/decoder.c:159)
main debug: `file:///home/mato/Videos/Filmy/SUNSHINE.mp4' successfully opened
mp4 debug: elst (0) gives 0ms (movie)-> 41ms (track)
mp4 debug: track[Id 0x1] using Sync Sample Box (stss)
mp4 debug: stts gives 1 --> 0 (sample number)
mp4 debug: track[Id 0x2] does not provide Sync Sample Box (stss)
main debug: no usable vout present, spawning one
main debug: window size: 640x480
main debug: looking for video output module: 8 candidates
faad warning: decoded zero sample
main debug: no aout present, spawning one
main debug: looking for audio output module: 6 candidates
xvideo debug: adaptor 0, port 133, format 0x32315659 (YV12) planar
main debug: Registering subpicture channel, ID: 2
main debug: Registering subpicture channel, ID: 3
main debug: Registering subpicture channel, ID: 4
main debug: Registering subpicture channel, ID: 5
xvideo debug: XShm video extension v1.1 (with pixmaps, opcode: 148)
pulse debug: Pulse mainloop started
xvideo debug: Window manager supports NetWM
xvideo debug: Window manager supports _NET_WM_STATE_FULLSCREEN
xvideo debug: Window manager supports _NET_WM_STATE_ABOVE
xvideo debug: Window manager supports _NET_WM_STATE_BELOW
main debug: using video output module "xvideo"
main debug: waiting for thread completion
main debug: got 8 direct buffer(s)
main debug: picture in 640x480 (0,0,640x480), chroma I420, ar 4:3, sar 1:1
main debug: picture user 640x480 (0,0,640x480), chroma I420, ar 4:3, sar 1:1
main debug: picture out 640x480 (0,0,640x480), chroma I420, ar 4:3, sar 1:1
main debug: direct render, mapping render pictures 0-6 to system pictures 1-7
main debug: thread 2927594384 (video output) created at priority 0 (video_output/video_output.c:421)
pulse debug: Pulse stream connected
pulse debug: Pulse initialized successfully
pulse debug: Buffer metrics: maxlength=48000, tlength=43200, prebuf=21600, minreq=4320
pulse debug: Using sample spec 's16le 2ch 48000Hz', channel map 'front-left,front-right'.
pulse debug: Connected to device alsa_output.pci_1002_4383_sound_card_0_alsa_playback_0 (0, not suspended).
main debug: using audio output module "pulse"
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "float32tos16"
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: input 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: found a filter for the whole conversion
pulse debug: Pulse stream started
main warning: output date isn't PTS date, requesting resampling (121618)
main warning: audio drift is too big (121617), dropping buffer
main warning: buffer is 100284 late, triggering upsampling
main warning: output date isn't PTS date, requesting resampling (49808)
main warning: audio drift is too big (149925), dropping buffer
main warning: audio drift is too big (128592), dropping buffer
main warning: output date isn't PTS date, requesting resampling (47810)
main warning: audio drift is too big (155048), dropping buffer
main warning: audio drift is too big (133714), dropping buffer
xvideo debug: entering fullscreen mode
xvideo debug: using XFree Xinerama extension
xvideo debug: leaving fullscreen mode
main warning: late picture skipped (76383)
main warning: late picture skipped (34680)
main warning: resampling stopped after 16102351 usec (drift: 12619)
main warning: late picture skipped (128981)
main warning: late picture skipped (87326)
main warning: late picture skipped (45618)
main warning: late picture skipped (3909)
main debug: new aspect-ratio 5:4, sample aspect-ratio 15:16
main debug: window size: 640x512
main debug: cropping picture 640x480 to 0,0,640x480
main debug: window size: 640x512
main debug: cropping picture 640x480 to 0,0,640x480
main debug: new aspect-ratio 4:3, sample aspect-ratio 1:1
main debug: window size: 600x480
main debug: cropping picture 640x480 to 20,0,600x480
main debug: window size: 640x480
main debug: cropping picture 640x480 to 0,0,640x480
main debug: opening config file /home/mato/.vlc/vlcrc
main debug: looking for interface module: 1 candidate
logger: using logger...
logger debug: opening logfile `/home/mato/Desktop/xorg1.conf'
main debug: using interface module "logger"
main debug: thread 2912697232 (interface) created at priority 0 (interface/interface.c:231)
main warning: late picture skipped (105650)
main warning: late picture skipped (63944)
main warning: late picture skipped (22235)
xvideo debug: entering fullscreen mode
xvideo debug: using XFree Xinerama extension
xvideo debug: leaving fullscreen mode
main warning: late picture skipped (85566)
main warning: late picture skipped (43908)
main warning: late picture skipped (2210)
main warning: late picture skipped (21687)
main debug: removing all interfaces
main debug: thread 2912697232 joined (interface/interface.c:258)

... popri hokeji...